The Stallion operates in classic SA fashion. To load, pull the hammer to half-cock, open the loading gate and insert the cartridges.

The shooting world would be hard-pressed to find a handgun that has received more publicity than the Single Action Army-type revolver. While the gun was always popular in the West, in all probability it was the television shows in the 1950s and '60s that brought the gun to the forefront of the American sportsman's consciousness.

The Stallion's frame is wide and comfortable, and the fluted cylinder adds a touch of Cowboy Action authenticity.

At first, Colt was the name in single actions. At one time, when the Hartford firm seemed to falter a bit in production, Ruger filled in the void. From then on the field opened up and outfits such as EMF, Arminius, Navy Arms, Beretta and Uberti joined the fray. Presently, Uberti is under the Benelli flag, and within almost 80 variations on its 16 basic models there is a family of guns that fall under the heading of "1873 Stallion." This series offers models chambered for lesser calibers such as the .22 Long Rifle and the .38 Special. Much smaller than the .44- and .45-caliber models, the Stallion fills the bill for those of us who like a lightweight, quick-handling gun chambered for calibers that are easy to shoot and effective on small game.

Picking up a .38 Special Stallion, I found it perfect in every respect. The blueing was deep, the color case-hardening had just the right patina, and all of the edges along the grip where wood meets metal were smooth and very tight. The stocks themselves were notably handsome as well: finely polished, lacquered and attached without cross screws. To remove the grip panels, simply remove the backstrap by backing out three screws--two on the top frame and one under the grip frame itself.

SPECIFICATIONS Uberti 1873 Stallion
IMPORTER:	Benelli USA
TYPE:	Single-action revolver
CALIBER:	.38 Special or .22 Long Rifle
CAPACITY:	6
BARREL LENGTH:	5.5 inches
OVERALL LENGTH:	11 inches
WEIGHT:	36 ounces
SIGHTS:	Fixed (adjustable sights optional)
STOCKS:	Walnut
FINISH:	Blued, color case-hardened
PRICE:	$360 to $430

Overall quality of the gun was first-rate. The polishing and deep blueing lack burnishing marks of any kind. The barrel, triggerguard, backstrap, ejector rod and cylinder are all blued to complement the overall appearance of the gun, giving it a genuine western flair. The hammer, trigger and bolt screws are polished bright. I found no scratches on the frame, cylinder or barrel.

Naturally, the Stallion holds six rounds. Loading is through the usual gate on the right side. To charge the weapon, open the gate, cock the hammer to half-cock, insert the cartridges, close the gate, cock the hammer all the way back, and you're ready to fire. After you are done, open the gate, pull the hammer back to half-cock again, and by using the ejector rod, push the spent cases to the rear and out of the gun.

The safety on this new model consists of pulling back the hammer slightly (to one click), then pushing the base pin to the rear to block the hammer from any forward movement. This base pin is then released from within the frame by depressing the base-pin screw while at the same time pushing the pin to the rear as far as it will go.

The trigger is narrow and came with a great 2.25-pound pull.There was only a bit of slack, making this gun an exception in a world where there is a lawyer behind every tree. (Inset) From 20 feet, the best group from the Uberti Stallion was with Remington's 158-grain lead SWC ammo.

You will hear the click as it reaches the stop and rests on the front of the hammer. To put it in firing mode again, push in on the base-pin screw, pull the base pin forward one notch, and you're back in business.

ACCURACY RESULTS:
LOAD	BULLET WEIGHT (gr.)	AVG. VELOCITY (fps)	STANDARD DEVIATION	AVERAGE GROUP (in.)
Remington SJHP	110	1,038	27	1.75
Hornady HBWC	148	824	8	2.25
Remington Lead SWC	158	804	32	1.25
Velocity recorded 10 feet from the muzzle using an Oehler Model 33 chronograph. Accuracy tested off a bench rest; results are the average of five five-shot groups at 20 feet. Abbreviations: SJHP, semi-jacketed hollowpoint; HBWC, hollow-base wadcutter; SWC, semi-wadcutter.

Sights are typical western, with a front, rounded blade and a frame type of "gutter" sight channel (target sights are optional). With the hammer back, you gain full access of both sighting fixtures, and to add to the sight picture, the rear sight has a well-defined notch located at the rearmost part of the top frame. The hammer is checkered for non-slip cocking of the piece no matter what the weather conditions. After giving the hammer my usual 50 cycles to rid the gun of any factory burrs or stiffness, trigger pull on my gun evened out at 2 1/4 pounds on my RCBS trigger scale without any noticeable amount of slack before the sear let go.

To put the gun in a safe mode, the base pin can be pushed back until it contacts the face of the hammer. To put things back to a firing mode, pull the pin back out. (Bottom) All of the parts except for the frame are polished bright and blued. Here we see the detail on the ejector rod and blade front sight.

With the gun loaded, the balance of the piece was just under the cylinder, which makes for good handling.

I give the gun high marks both for accuracy and lack of recoil. From 20 feet, Remington lead SWC 158-grain ammo proved to be the optimum choice for plinking potting squirrels when you've got some downtime on a big-game hunt. I found the Stallion, with its smaller frame, to be just about ideal for what I need in a single-action revolver.