REVIEWS
Kimber Stainless Target II .38 Super
For pure shooting pleasure, it's hard to beat this accurate and dependable 1911 chambered in .38 Super.
|
|
| MAKER: | Kimber |
|---|---|
| TYPE: | Single-Action semiauto |
| CALIBER: | .38 Super |
| CAPACITY: | 9 + 1 |
| BARREL LENGTH: | 5 inches |
| OVERALL LENGTH: | 8 1/2 inches |
| WEIGHT: | 38 ounces |
| SIGHTS: | Target adjustable rear, blade front |
| STOCKS: | Checkered rubber |
| METAL: | Satin Stainless |
KIMBER STAINLESS TARGET II Specifications
Back in the days when I shot IPSC matches on the weekends, the .45 ACP was the most popular cartridge on the circuit. It offered the power and accuracy in tuned guns needed to capture the gold, yet as a shooter I was always looking around for something different to break the mold, so to speak.
At that time, the .38 Super was being considered as long as it met the power requirements, so I purchased a Colt 1911 chambered for it, had the trigger reworked, Bo-Mar sights added and an aftermarket beavertail housing installed.
Since that time, I've sent many .38 Super rounds downrange, and to this day it remains at the top of my list of favorite handgun cartridges. Much to the dismay of many, however, it is still on the short list for overall sales, as only a few manufacturers today make an auto chambered for a cartridge that was introduced in 1929. One of them is Kimber. The company presently lists three 1911 variants in .38 Super--two in target guise and one for defense with a shorter four-inch barrel.
Handling Kimber's Stainless Target II, I find little difference in the weight and other characteristics that distinguish my pet Gold Cup in .45 ACP. The heft is there, and looking at Kimber comparisons, both the .38 Super and .45 ACP versions check in at a recoil-dampening 38 ounces. The Stainless Target II's slide and frame flats are polished with a satin finish, while the top of the slide and frame are bead blasted for anti-reflective qualities and additional resistance to wear.
In the hand, the gun is comfortable, and the only thing I'd like to see is the option of an arched mainspring housing. Out of the box, the gun (like all other Kimbers) is equipped with a straight housing that is checkered and, along with the rubber grips, aid in keeping the gun on target. A contoured beavertail safety is machined to allow it to ride higher in the hand without impeding the operation of the hammer. The hammer is serrated and skeletonized, as is the trigger, which broke at 41/2 pounds on my test gun, with just a hint of slack before the sear let go.
Safetywise, the traditional beavertail safety is still very much part of the package, as is the slide safety mounted on the left side of the gun. With the hammer cocked, up is for Safe, and, with only a snick downward, the gun is ready for immediate action. Additionally, there is the half-cock position on the hammer and Kimber's own firing-pin safety, which, according to the company, "makes each pistol more secure without impeding performance or altering trigger pull."
Forward of the slide safety is the slide release, which has been slightly extended for ease of operation. Directly below and behind the trigger is the magazine release. To facilitate inserting the magazine, the magazine well has been beveled. In .38 Super, incidentally, capacity is nine rounds plus one in the chamber.
© 2009 Intermedia Outdoors. All rights reserved.
